superhero mask - tutorial & pdf

It is a superhero love fest in our house at the moment. "The guys" have to go everywhere with him, even to bed. I decided to have a go at making a simple superhero mask and all of sudden, best mum ever! I even had to make a second one for myself or Daddy to wear. As soon as he put it one he was out zooming around the garden and showing me examples of "incredible strength" as he puts it. 

Tutorial:

Materials:
8 - 10 inches of 1/4 inch soft elastic depending on your little one's noggin.
10" x 6" of felt or other material - 2 pieces.
PDF template
Note - if you use another material other than felt you might want to add fusible interfacing for support.

Print out PDF and cut out template.
Place PDF on both pieces of material with wrong sides facing. Pin and cut. 
Measure the elastic by putting it around your little person's head and pulling it slightly so that it will stay put. Cut. Hint - use a small scissors to cut the eyes out.

Place elastic between the front and back, like a sandwich with right sides facing each other. Pin.

I found it helpful to pull the elastic through one eye hole to be sure I wouldn't sew over it.
Sew all around the mask with a 1/4 inch seam leaving a small hole to turn it right-side out. 

Cut notches for turning or use a pinking shears as I have done below. 

Turn right side out and hand sew the small opening shut.
Zig zag stitch around the eye holes. This is tricky. I used the smallest zig zag stitch on my machine. Don't worry too much about perfection - kids don't notice :)

That's it, the mask is ready! 

And your superhero is ready to zoom! 

The "green lantern ring"on his finger is literally a strip of felt tied with a knot. I love imagination. 


I am sharing this post at some fun link parties - check them out.